APARATOS DE AFILADO PROFESIONAL

Brands: BOKER
Categories: SHARPENERS

090508 Top Finish Pull Strap
The Boker Top Finish pull strap is covered on both sides with supple leather for a particularly long service life. It brings the perfect finish to any blade after the knife has been sharpened on a stone, such as the Belgian chunk. Both surfaces are perfect for processing with the abrasive pastes from the Boker range. Work surface 4 x 26 cm.
09SR001 Long Life 20
The winner Long Life knife sharpener made of synthetic ruby ​​is 20 times harder than hardened steel (20,000 knoop corresponds to approx. 200 HRC). The unusual thing about this sharpener is its high effectiveness, i.e. the little time spent sharpening in combination with an unusually fine result, which is particularly evident from the long service life of the cutting edge. In addition, the sharpener is more durable than, for example, a diamond sharpener, since this is not a coating but a solid material. The knife sharpener can be used dry or wet. Simply clean with a sponge after use. The grinding tube is 20 cm long.
09SP204 Tri-Angle Sharpmaker
The Spyderco Tri-Angle Sharpmaker impresses above all with its simple handling, which does not require any previous knowledge and still delivers professional results. For a sharpening process with the practical Sharpmaker, a total of four passes with twenty swings per blade side are carried out. To do this, the blade is placed alternately at the upper end of the right and left whetstone and the knife is then pulled down with light pressure. Specified grinding angles of 12.5 degrees, 30 degrees and 40 degrees make use even easier. The plastic stand and the safe hand protection guarantee easy and gentle removal. Scissors, axes, tools and serrated blades can also be easily provided with the necessary bite. Supplied with two pairs of triangular ceramic stones with different grain sizes, detailed instructions and DVD.
09SP103 Tri-Angle Stone CBN
CBN (Cubic Boron Nitride) is an abrasive that is almost as hard as a diamond coating. It is more abrasion resistant and has better heat dissipation than alumina or silicon carbide, making it a preferred abrasive for industrial grinding. As a supplement (roughly) for the proven Spyderco Triangle Sharpmaker. Set of two rods.